AEG X79283MG0 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi AEG X79283MG0. AEG X79283MG0 49 halaman. Cooker hood

CONTROLS

Button Function

Turns the lights on/off at maximum strength.

Turns the motor on/off at speed one.

Turns the Motor on at speed two.

Press and hold the button for approximately 3 seconds, with all the

loads turned off (Motor and Lights), to turn the Activated Charcoal

Filter alarm on. The relevant LED flashes twice to confirm.

To turn the alarm off, press the button again and hold for at least

3 seconds. The relevant LED flashes once.

Turns the Motor on at speed three.

Press and hold the button for approximately 3 seconds, with all the

loads turned off (Motor and Lights), to perform a reset. The LED

S1 flashes three times.

Turns the Motor on at INTENSIVE Speed.

This speed is timed to run for 10 minutes. At the end of this time,

the system returns automatically to the speed that was set before.

If it is activated with the motor turned off, the hood will switch to

OFF at the end of the time.

Press and hold for 3 seconds to enable the remote control,

indicated by the LED flashing twice.

Press and hold for 3 seconds to disable the remote control,

indicated by the LED flashing just once.

Signals the Metal Grease Filter saturation alarm, indicating that it

is necessary to wash the filters. The alarm is triggered after the

Hood has been in operation for 100 working hours. (Reset see the

parag. Maintenance).

When this is activated, it signals the Activated Charcoal Filter

saturation alarm, indicating that the filter must be changed; the

Metal Grease Filters must also be washed. The Activated Charcoal

Filter saturation alarm comes into operation after the Hood has

been working for 200 hours. (Activation and Reset see the parag.

Maintenance)

ENGLISH

Led

Fixed.

Flashing.