Kohler IRON/IMPRESSIONS K-3051-8 Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Perlengkapan Kamar Mandi Kohler IRON/IMPRESSIONS K-3051-8. Kohler IRON/IMPRESSIONS K-3051-8 3 halaman. Cast iron top and basin lavatory
Halaman Cetak
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
·
Silicone Sealant
·
Level
·
Tape Measure
INSTALLATION
CAUTION: Risk of personal injury or product
damage.
Cast iron lavatories are very heavy. Get help
lifting the lavatory into place.
1. Install the faucet and drain to the lavatory. Refer to the
faucet and drain manufacturer s instructions.
2. Run a
(6 mm) continuous bead of silicone sealant
around the top of the vanity. as Fig 2.
IMPORTANT!
To ensure proper installation, get assistance
aligning and lifting the lavatory into place.
IMPORTANT!
The back edge of the lavatory must be flush
against the back of the vanity and equal left and right
overhang on each side of the vanity.
3. Position the lavatory on top of the vanity.
4. Verify that the lavatory is level. If the lavatory is not level,
gently press down on the lavatory.
5. Wipe away excess silicone sealant.
6. Connect the water supply and the drain assembly.
7. Run water into the lavatory and check for leaks.
1049894-T01-A
,
(
·
·
·
Lavatory
Apply a 6mm
bead of silicone sealant
on vanity.
6mm
Vanity
Fig. 2
2
1.
2.
6mm
3.
4.
5.
6.
7.
-2-
)
2