AEG KO-LAVAMAT 88840 Panduan Pengguna - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering AEG KO-LAVAMAT 88840. AEG KO-LAVAMAT 88840 48 halaman. Aeg prosteam condenser dryer user manual
Halaman Cetak
32
What to do if ...
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
If, during operation, the warning message appears on the LCD follow strictly guides included
in the message on the display. If you are not able to solve the problem, please inform your
local service force centre.
Problem
Dryer does not work.
ProSteam programme does not
start. Message on the display:
The steam water tank is empty.
Please fill it and then press
START.
After a ProSteam programme,
garments are not sufficiently
smooth.
After a ProSteam programme,
there are no creases left in the
garments.
Possible cause
Mains plug is not plugged in or
fuse is not working correctly.
Loading door is open.
Have you pressed the START
PAUSE button?
Water tank is empty.
Recirculation valve is closed
(OFF position)
Wrong programme selected
(e.g. SYNTHETICS instead of
COTTON).
Too low a steam level set.
Too many garments in ma-
chine, or garments that are too
different.
Clothes are not removed until
the anti-crease phase is finish-
ed.
Garments not hung on clothes
hangers and/or not tugged into
shape.
Multi-layered garments tend
to lose their shape.
The ProSteam programme has
the effect of smoothing gar-
ments.
Remedy
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Close loading door.
Press the START PAUSE button
again.
Fill water tank.
Turn the recirculation valve to
ON position.
Note the composition of the
fabric.
Set a higher steam level.
Load the machine with fewer
garments, or only similar ones.
Remove clothes quickly one at
a time from the machine as
soon as possible after the start
of the anti-crease phase.
Hang garments on clothes
hangers, do up buttons and tug
garments into shape.
Reshape multi-layered gar-
ments by ironing after they
come out of the machine.
Iron creases in again after the
ProSteam programme.