Kohler K-1244 Panduan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perlengkapan Kamar Mandi Kohler K-1244. Kohler K-1244 48 halaman. Bath whirlpool
Juga untuk Kohler K-1244: Panduan Pemilik Rumah (32 halaman), Panduan Pemilik Rumah (29 halaman), Panduan Instalasi (48 halaman), Panduan Pemilik Rumah (36 halaman), Panduan Pemilik Rumah (32 halaman), Panduan Instalasi (48 halaman), Panduan Instalasi (44 halaman), Panduan Instalasi (48 halaman), Panduan Instalasi (44 halaman), Panduan Pemilik Rumah (29 halaman), Panduan Instalasi (48 halaman)

GFCI-Protected

Receptacle

7. Make Electrical Connections

WARNING: Risk of electric shock. To reduce the risk of electrical shock, connect the blower motor to

a properly grounded, grounding-type receptacle protected by Ground-Fault Circuit-Interrupters

(GFCI's). Do not remove the plug grounding pins. Do not use grounding adapters.

NOTE: The bath with airjets model number is printed on a label near the blower motor. This label also

identiﬁes the electrical rating.

Your Kohler bath with airjets is equipped with a cord and plug. The blower motor has been wired

at the factory. A licensed electrician must install a dedicated GFCI-protected, 120 V, 15 A, grounded

outlet. Locate the outlet behind the bath, and within 24" (61 cm) of the blower motor.

Plug the blower motor into this outlet.

Clean the area of all dust and debris.

Kohler Co.

Blower Motor

1040292-2-C