AEG LAVATHERM 57810 Informasi Pengguna - Halaman 21
Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM 57810. AEG LAVATHERM 57810 32 halaman. Condensation dryer
Juga untuk AEG LAVATHERM 57810: Informasi Pengguna (32 halaman)
Halaman Cetak
Problem
Drying results unsatis-
factory.
Loading door does not
open with DOOR
(DEUR) button.
Loading door does not
close.
When a button is
pressed, Err appears
in the multi-display.
Drum light does not
work.
PROGRAMME TIME
(LOOPTIJD) display
changes erratically or
stays unchanged for a
long time.
Possible cause
Wrong programme selected.
Lint filter clogged.
Heat exchanger clogged
with lint.
Incorrect volume of laundry.
Ventilation slots in base area
covered up.
Residue on inside surface of
drum or drum ribs.
Mains plug disconnected.
Programme selector in OFF
(UIT) position.
Fine strainer not in place
and/or large mesh filter not
locked in place.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Programme selector in OFF
(UIT) position.
Defective light bulb.
Programme time is correct-
ed automatically depending
on type and volume of
laundry and level of damp-
ness.
Remedy
Select a different programme
the next time you dry (see
"Overview of programmes"
section).
Clean lint filter.
Clean heat exchanger.
Observe recommended load-
ing volumes.
Uncover ventilation slots in
base area.
Clean inside surface of drum
and drum ribs.
Adapt with the INTENSITY
(RESTVOCHT) function (See
"Selecting additional func-
tions" section).
Plug in at mains socket.
Set programme. Loading door
can be opened at any time by
exerting pressure on the door.
Install fine strainer and/or
snap large mesh filter into
place.
Turn the programme knob to
OFF (UIT). Set the programme
again.
Turn programme selector to
LIGHT (VERLICHTING) or to any
programme.
Replace light bulb (see next
section).
Automatic process; this is not
a machine fault.
21