AEG LAVATHERM 59800 Informasi Pengguna - Halaman 30

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM 59800. AEG LAVATHERM 59800 36 halaman. Aeg condenser dryer with heat pump
Juga untuk AEG LAVATHERM 59800: Informasi Pengguna (32 halaman)

Halaman Cetak
AEG LAVATHERM 59800 Informasi Pengguna

Changing door stop

1
Warning! The door stop may only be changed by a specialist. If neces-
sary, please contact our after-sales service or your specialist dealer.
Warning! Before changing the door stop, disconnect the mains plug;
with a permanent connection: fully unscrew or deactivate the fuse.
1. Open loading door.
2. Unscrew hinge A from the front of
the machine and take off the load-
ing door.
3. Remove cover plates B and C. To do
this, insert a thin screwdriver into
the slots as shown in the illustra-
tion, press downwards slightly and
pry out the cover plates.
4. Use an appropriate tool and exert
pressure to unfasten locking block D
from the snap-on fixture, take out
and reinsert on the other side, hav-
ing rotated the block through 180°.
5. Unscrew hinge A from the loading
door, rotate through 180°, reinsert
on the opposite side and screw
down.
6. Reinsert cover plates B and C on the opposite site having first rotated
them through 180°.
30