AEG LAVATHERM 8040 TW ELECTRONIC Informasi Pengguna - Halaman 24

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM 8040 TW ELECTRONIC. AEG LAVATHERM 8040 TW ELECTRONIC 32 halaman. Condenser dryer with heat pump

Programming options

Objective
Permanently program in
the audible signal which
reminds you that the
programme is complete.
Adjust detection of de-
gree of drying:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme than with the
standard setting.
If the EMPTY WATER (BE-
HÄLTER) display is to re-
main permanently
deactivated when using
an external condensate
drain.
24
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) button and hold
down for approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
(SIGNAL) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the SILK (SEIDE) and AUDIBLE SIGNAL (SIGNAL)
buttons at the same time and hold down for approx. 5
seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF (AUS).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the WOOL (WOLLE) and LONG ANTICREASE (KNIT-
TERSCHUTZ +) buttons at the same time and hold down
for approx. 5 seconds. The multi-display briefly displays
"0"
The EMPTY WATER (BEHÄLTER) display is permanently
deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays "1" (rather than
"0").
Implementation