AEG PNC916099285 Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengering AEG PNC916099285. AEG PNC916099285 28 halaman.

3. Gather lint with hand from both

internal parts of the filter.

Throw the lint in the dustbin.

4. If necessary, clean the filter with a

vacuum cleaner. Close the filter.

5. If necessary, remove lint from the

filter socket and gasket. You can use

a vacuum cleaner. Place the filter

back inside the filter socket.

10.2 Emptying the water

container

Empty the condensed water container

after each drying cycle.

If the condensed water container is full,

the programme stops automatically. The

Water container symbol comes on

the display and you must empty the

water container.

To empty the water container:

1. Pull the water container out keeping

it in a horizontal position.

2. Pull the plastic connection out and

drain the water into a basin or

equivalent receptacle.

3. Push the plastic connection back in

and place the water container back

into position.

4. To continue the programme press

the Start/Pause button.

10.3 Cleaning the condenser

Heat exchanger flashes

If the symbol

on the display, inspect the condenser

and its compartment. If it is dirty, clean it.

Do the check not less than once a 6

months.

WARNING!

Do not touch the metal

surface with bare hands.

Risk of injury. Wear

protective gloves. Clean

carefully to avoid damaging

the metal surface.

To inspect:

ENGLISH