Kohler Triton K-T7019 Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perlengkapan Kamar Mandi Kohler Triton K-T7019. Kohler Triton K-T7019 24 halaman. Bath/deck-mount faucet
Juga untuk Kohler Triton K-T7019: Panduan Instalasi (8 halaman), Panduan Pemilik Rumah (21 halaman)
Halaman Cetak
Install Spout Supply Tube
Spout
Supply
Tube
1-1/4" (3.2 cm)
2. Install the Spout Supply Tube
Remove the plaster guard from the spout supply tube.
Using a tube cutter, cut the spout supply tube 1-1/4" (3.2 cm)
above the finished surface.
Using a file, remove all burrs from the spout supply tube. This
will prevent damage to the O-ring inside the sleeve.
For tile-covered deck installations: Slide the brass washer
(provided) onto the spout supply tube with the flat side facing
forward. For all other installations: Discard the brass washer.
Loosen the screws in the sleeve.
Using a twisting motion, slide the sleeve onto the spout supply
tube until it contacts the finished surface.
Align the sleeve with the screws offset from the center (not facing
directly forward or backward), as shown.
Retighten the screws.
1011303-2-C
For Tile-Covered Deck
Installation
Brass Washer
Spout Supply Tube
Install
Finished
Sleeve
Deck
4
Sleeve
Screws
Kohler Co.