Kohler BRAZN K-EX22384T-HC Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Toilet Kohler BRAZN K-EX22384T-HC. Kohler BRAZN K-EX22384T-HC 8 halaman. Floor standing toilet

Halaman Cetak

TO CONNECT WATER

SUPPLY

* Flexible hose are recommended to

connect the supply line to the fill valve.

If you use a rigid connection(not

provided), take care not to apply side

forces to the bottom of the fill valve. Be

sure the rigid connection must be fit

with supply line completely to prevent

damage shank by forced connection.

IMPORTANT:

Before turning on the supply valve for the first

time, follow the steps below to clear sand, debris and rust

from the system:

Make sure water supply is off. Remove valve END by

rotating it 1/8 turn counterclockwise.

While holding a container over the uncapped VALVE to

prevent splashing, turn water supply on and off a few times.

Leave water supply off.

Replace END by engaging lugs and rotating 1/8 turn

clockwise.

Make certain the top is turned to the locked

position. Valve may not turn on if top is not fully in the

locked position.

Turn on water supply. Check that water level is at the marked

water line.

Install the tank lid and the seat. Use

the supplied hardware pack for seat.

Periodically check for leaks for several

days following the installation.

Connect the push button and flush

valve.

1486239-T01-A

Supply Shank*

Supply Shut-Off Valve

Fig.#13

Fig.#14

-6-

)

1/8

(