A-S-S BASS 2020 Instruksi Kerja - Halaman 4

Jelajahi secara online atau unduh pdf Instruksi Kerja untuk Mesin Jahit A-S-S BASS 2020. A-S-S BASS 2020 7 halaman. Automatic single head serging unit for sewing of front- and back trouses without knee lining

Halaman Cetak

In the seam number 4 or 5 appears in the display following indicates.

e. g. SP: 01 = 3000 RPM

With the functional key F3 can be selected in the parameter list. By pressure

on the key the parameter number increases (arising). With the functional key

F4 one gets again in the parameter list downwards (descending). After print on

the functional key F2 flashes the Curser on the first position can be changed,

after renewed pressure on the key F2 walks Curser a place farther to the right.

Now the numerical values can be raised with the help of the keys F3 and F4 or

be reduced

With the key P the given value is confirmed

After renewed one press of the key P the seam program is indicated again.

4 After press of the key F4

The even menu 1 in opens the different test programs and seam sequences

can be selected.

e. g. Menu : 1>

DIAGNOSTIK

With the key F3 get in to the level of the seam-sequences in the order the to

make your own program.

e. g. MENU : 2>

SEQUENZEN

With the key F2 the display opens for the seam sequences in this program.

e. g. M01 0

this means:

in the seam consequence M01 nothing (0) is assigned at the moment.

With F4 a seam can be assigned with the keys F3 /. Afterwards the cursor with

the key F2 on the next input position is brought and is assigned from out there

with the keys F3 / F4 the next seam. It can be put up to 5 Sewed seam

sequence .

e. g. M01 2 3 4 1 5

e. g. Program M01