Kohler 23EKOZD Panduan Petunjuk Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Generator Portabel Kohler 23EKOZD. Kohler 23EKOZD 12 halaman.

2.6

Ground lead connection. Connect the lead

(LK-0616-1715) to the ground stud located inside

the junction box using nut (M6923-06-80), washer

(M125A-06-80), lock washer (X-22-12 qty. 2), and

screw (M933-06020-60). Route the lead under the

U-channel shown in Figure 6. Connect the other

end of the lead to the customer connection panel

location. See Figure 9.

2.7

Fuel line connections. See Figure 9 for fuel

supply and return connection locations.

2.8

Secure the U-channel (X-6047-14) as shown in

Figure 6.

1. Customer connestion panel (GM93558 or GM95124)

2. Opening for exhaust tube.

3. Lead (LK-0616-1715).

4. Battery cable (X-545-259). Attach positive battery cable to

the starter motor.

5. Hose clamps (X-426-12 qty. 2). Attach seawater inlet hose to

inlet on the seawater pump.

6. Hose (X-373-30)

7. Battery cable (X-545-241 or X-545-176). Attach negative

battery cable to the engine block.

8. Insulated clamp (X-672-32)

9. Attach lead to the ground stud located inside of the junction

box using nut (M6923-06-80), washer (M125A-06-80),

lock washer (X-22-12 qty. 2), and screw (M933-06020-60).

Figure 9 Customer Connection Panel Connections

TT-1651 4/17a

GM93548-J

1. New location for existing hose connector

2. Route harness (GM96427) from temperature sensor to engine

harness.

Figure 10 New Location for Existing Hose Connector

GM93548-J