Kohler 2460 Instalasi dan Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Perabotan Dalam Ruangan Kohler 2460. Kohler 2460 24 halaman. Vanity cabinets and mirrors
Halaman Cetak
Note! A drawer height adjustment wheel and release catch are located
underneath the front of the drawer at each corner.
Removal
1.
Slide the drawer out on the rails until fully extended.
2.
Pull both release latches towards you, then pull the front of the drawer
up off the rails.
3.
Lift the drawer out from the vanity cabinet.
Reinstallation
4.
Fully extend the rails.
5.
Align the grooves on the underside of the drawer with the rails and set
into place.
6.
Hold the drawer in place on the rails with one hand. With your other
hand, pull the tab on the bottom front of the rail towards you until you
hear the rail "snap" into place. Repeat this step for the remaining rail.
7.
Make sure the drawer is locked in place by gently lifting the front of
the drawer upward. If the drawer does not lift up, it is engaged. If the
drawer lifts up then repeat the above procedure.
8.
Slide the drawer in and out to ensure smooth operation.
Adjustment
9.
Slide the drawer out until it is fully extended.
10. Turn the drawer height adjustment wheels to adjust the drawer height.
To lower the drawer, turn the wheel on the left hand side of the drawer
clockwise and/or the wheel on the right hand side of the drawer
anticlockwise. Turn the wheel(s) in the opposite direction to raise the
drawer.
13
1067217-W2-B