acaia Pearl S Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Timbangan acaia Pearl S. acaia Pearl S 20 halaman. Coffee scale
Juga untuk acaia Pearl S: Panduan Pengguna (18 halaman), Panduan Pengguna (20 halaman)

Halaman Cetak

Product Care Information

Battery charge

• You can charge the battery by plugging the USB cable into

any of the power supplies listed below:

• A computer

• A USB wall-charger with an output of 5 volts and 1 amp

• A DC car-charger with an output of 5 volts and 1 amp

• It takes about 3-4 hours to fully charge the battery from

empty. Try not to let the battery completely run out before

charging. Charge the battery as needed, but we don't

recommend charging more than once a week.

• A fully charged battery can provide up to 16 hours of

working time in normal brightness and up to 40 hours in low

brightness mode.

• Battery percentage can be viewed via the Acaia apps.

* Note: Using a "fast-charging" charging block or charging hub (a charging block/hub delivering

over 5v at 1A) could damage your Acaia scale's circuit board.

Calibration

Turn on scale

Turn on the Acaia

scale.

Tap T button

Make sure the scale

is in weighing mode

and the unit is set to

'gram', then tap the

'T' button rapidly.

See CAL display

Keep tapping the 'T'

button until 'CAL' is

shown on the

display.

Place a weight

(100 g/500 g/1000 g)

on the scale and wait

until the display

shows '_End_'.

Calibration is now

complete!