Aqara G2H Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Aqara G2H. Aqara G2H 9 halaman. Camera hub

Open Aqara Home App, and click "+" on the upper corner of the homepage.

Select "Smart Camera G2H", and operate it as the App prompts. After the

device is connected successfully, the blue indicator light will be always on.

If the device failed to be added, please check the following steps:

* Please make sure the camera is connected with the 2.4GHz Wi-Fi network;

* Wi-Fi name or password may contain special characters. Please replace

them with ordinary characters and try again;

* The camera does not support the WAP/WAP2 Wi-Fi network;

* The camera cannot recognize the QR code generated by the phone.

Please make sure the screen of the phone is not less than 4 inches, and can not

scan the QR code under back-lighting.

* Please check whether the router turns on the Wi-Fi connection watcher

function, which causes the network connection failures;

* Please check whether the router turns on the AP isolation function, which

causes the phone can not search the camera within LAN;

* It is recommended not to connect it to a bridge network.

4. Connect to Apple HomeKit

Open Apple Home App, click "+" on the upper right corner, and then enter

the adding accessory page. Scan or manually enter the HomeKit setup code at