AQmax AQ-300-U Buku Panduan Pengguna Buku Panduan - Halaman 10

Jelajahi secara online atau unduh pdf Buku Panduan Pengguna Buku Panduan untuk GPS AQmax AQ-300-U. AQmax AQ-300-U 17 halaman. High sensitivity

AQ-300 Operating Manual

USB Driver

System

Requirements

AQ Max

Technology Inc.

Fax: ++886 6 2380861

E-Mail:

IBM, Pentium or above and other compatible PC; 16 MB and above

memory; Windows 98/Me/2000; VGA Graphic Adapter.

1. Copy entire <AQ-300 USB> folder from CD to hard disk.

2. Connect AQ-300 USB connector to computer. While the computer

automatically starts the installation program, please direct the driver to the

<AQ-300 USB> folder.

3. After the installation is complete, go to <Device Manager> and select

<Ports (COM & LPT)> to verify if a virtual COM port <USB to Serial Port>

was created.

Verify the COM port # to start using your own navigating software.

1. Click <Start> menu, select <Settings>, then enter <Control Panel>.

2. After entering <Control Panel>, select <System>.

3. Select <Device Manager>.

4. Find the <Connect Port> and check the Virtual COM Port, which was

created by the USB driver. Please note that the Virtual COM Port

number might be different from every computer. Before using

navigating software, please confirm the COM Port numbers created by

your computer and provided by your navigation software. They must be

the same Com Port numbers. Otherwise, the navigating software won't

receive the satellite signal for the un-match COM Port setting.

6F-2, No.90, Sec.1, Chung-Hwa East Rd, Tainan, Taiwan

Web: