Dexin MW1083 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mouse Dexin MW1083. Dexin MW1083 8 halaman. Rf wireless scroll mouse

Operating Voltage:

Operating Current:

Standby Current:

FSK transmission, 4K transmission rate with one way error detection

Troubleshooting

1. Mouse does not function

If mouse is not functional, please turn off the computer first.

Check the cable is firmly attached to the computer mouse port.

Check the channel selection of both receiver and mouse are the same.

Check if the batteries are properly connecting.

The

"+"

and

"-"

aren't inserted correctly, the device won't work.

Restart the computer again.

If you used another brand of mouse, did you

For more information, refer to the other device's documentation or the original

documentation that came with your computer.

2. Reducing Interference with Other Wireless Devices

All 27MHz radio-based devices are subject to interference from other 27MHz radio-

based devices, such as cordless telephones, cordless baby monitors, and cordless toys.

It may help to move the receiver unit and the base unit for the other wireless device

(such as cordless telephone cradle) as far apart as possible. You may need to

experiment to determine the locations that are best for your environment.

3. Interference with other RF wireless mouse

Please switch the channel to a different carrier. To do so, you need to adjust both

receiver and mouse to the new channel (A or B). To reset the channel, please see "Step

2, Setting up the correct channel for both of receiver and mouse" of the installation guide.

Remember to establish communication between the receiver and the mouse by reset

identification codes.

Normally, the effective transmit distance is about 4 to 6 feet, depending on the

Transmitter: 1.8 to 3.2V DC (powered by batteries)

Receiver: 4.5 to 5.5V DC (powered by PS/2 port)

Transmitter: 11mA

Receiver: 30mA typical

Transmitter: 0.2mA or lower

on the batteries must match the

"+"

and

"-"

uninstall

the software for those devices?

on the slots. If the batteries