Dexin MWP41-L Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mouse Dexin MWP41-L. Dexin MWP41-L 10 halaman. Restorable optical cordless mouse

Troubleshooting

1. Mouse does not function

If mouse is not functional, please turn off the computer first.

Check the receiver and make sure it is firmly attached to the USB port of the

computer.

Check the placement of batteries and see if they are properly connecting.

The

"+"

and

the batteries aren't inserted correctly, the device won't work.

Restart the computer again. If the LED inside the receiver does not light up

when moving the mouse, please re-connect the mouse to the receiver.

Q: The mouse cursor can only move left & right during operation (it could

be caused by low battery or the optical sensor's data error).

A: Please take out one of batteries and put it back for a power reset and

then redo the connect procedure.

Q: The mouse does not work after waking up from power off mode by

pressing the connect button once.

A: This might be caused by imprecisely depressing the connect button to

wake up the mouse. Users can gain back normal operation by pressing

connect button on the mouse first, and then pressing the one on the receiver.

As soon as the LED inside the receiver starts flashing, the mouse is ready to

operate.

Optical Sensor Mouse functions best on surfaces with details for tracking. It

may not function on reflective, reflective pattern or non-visible detail surfaces!

2. Reducing Interference with Other Wireless Devices

All 27MHz radio-based devices are subject to interference from other 27MHz

radio-based devices, such as cordless telephones, cordless baby monitors, and

cordless toys. It may help to move the receiver unit and the base unit of other

wireless devices (such as cordless telephone cradle) as far apart as possible. You

may need to try several times for a location that is best in your operating

environment.

"-"

on the batteries must match the

Reducing Interference with Other Wireless Devices:

Move the receiver and the mouse closer to each other so that the

receiver is relatively shorter in distance to the mouse than to other

27MHz transmitters. You may need to re-establish the

"+"

and

"-"

on the slots. If