Aqua Computer farbwerk Panduan Pengguna dan Instalasi - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Pengontrol Aqua Computer farbwerk. Aqua Computer farbwerk 20 halaman. High power led controller for pcs
FARBWERK
All farbwerk outputs to be controlled by the aquaero must be configured to use an
"External controller source (aquabus, Bluetooth, USB)" within the farbwerk con-
troller configuration. This requires a (temporary) USB connection between PC and
farbwerk controller.
11.4. Bluetooth configuration (Bluetooth version only)
11.4. Bluetooth
11.4. Bluetooth
11.4. Bluetooth
configuration (Bluetooth version only)
configuration (Bluetooth version only)
configuration (Bluetooth version only)
For initializing a Bluetooth connection, a pairing key is required. The factory preset
of "1234" can be changed to another four-digit pairing key.
Please note: After changing the pairing key, you will have to power down the farb-
werk device for changes to take effect.
12. Basic settings (aquasuite)
12. Basic settings (aquasuite)
12. Basic settings (aquasuite)
12. Basic settings (aquasuite)
Click the entry „Settings" below the headline „aquasuite" to access basic settings
for language, units and start-up of the software.
12.1. Language
12.1. Language
12.1. Language
12.1. Language
Select a language from the drop down menu. After changing the language setting,
the software will have to be restarted.
12.2. Units
12.2. Units
12.2. Units
12.2. Units
Select the units to be used for temperature and flow values from the drop down
menus. After changing these settings, the software will have to be restarted.
12.3. Application start-up
12.3. Application start-up
12.3. Application start-up
12.3. Application start-up
You may customize start-up behavior to suit your preferences. You may also select
to hide the task bar symbol of the software when minimized.
12.4. Service administration
12.4. Service administration
12.4. Service administration
12.4. Service administration
The service (background service) configures special USB settings for all connected
Aqua Computer devices and should therefore always be active.
13. Bluetooth demo app for Android
13. Bluetooth demo app for Android
13. Bluetooth demo app for Android
13. Bluetooth demo app for Android
13.1. Download and installation
13.1. Download and installation
13.1. Download and installation
13.1. Download and installation
A free demo app is available for download. In order to install the app, you will
have to enable installation from unknown sources. Open the app drawer and go
to "Settings". In the settings screen, select "Security" and enable "Unknown
sources" from the "Device Administration" section.
- 16 -
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
aqua
computer
© 2014-2016