AAVIX AGT311 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pemangkas AAVIX AGT311. AAVIX AGT311 17 halaman. 9" electric string trimmer

It is possible to tie the extension cord and power cord in a knot to

prevent them from becoming disconnected during use. Make the

knot as shown, then connect the plug end of the power cord into

the receptacle end of the extension cord. This method can also be

used to tie two extension cords together.

Unit/Maintenance Safety

● Assemble the entire unit before each use for worn, loose, missing, or damaged parts. Do not use until the unit is

in proper working order.

This unit is double insulated. See the DOUBLE INSULATION CONSTRUCTION section. Have all

internal service performed by qualified service repair personnel to avoid creating a hazard or

voiding your warranty.

● Have all maintenance other than the recommended procedures described in the instruction

manual performed by your authorized service dealer.

● Always see your authorized service dealer to replace a damaged part. Replace damaged parts

before using the unit.

● Never douse the unit with water or other liquids or squirt with a water hose. Clean the unit using

a damp cloth. Wipe off with a clean dry cloth.

● Do not burn, incinerate, or expose this unit to extreme heat.

● Store the unit unplugged in a high, cool, dry, indoor area out of the reach of children.

● Use only recommended attachments and replacement parts to avoid creating a hazard and/or

voiding warranty.

● Maintain the unit according to recommended procedures.

● Damage to unit – If the trimmer strikes a foreign object or becomes entangled with it, stop the

tool immediately. Unplug it, check for damage, and have any damage repaired before proceeding

with operation. Do not operate the trimmer with a broken hub or spool. Contact your authorized

service center.

● Damage to cord – Turn the trimmer off and disconnect the plug when the trimmer is not in use,

when replacing the line, or prior to performing any maintenance task.

● Avoid dangerous environmental conditions – Do not use electric tools in damp or wet locations.

Do not use the tool in the rain. Follow all instructions in this manual for proper operation of tool.