Aqua Computer aquabus X4 Panduan Pengguna dan Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Kabel dan konektor Aqua Computer aquabus X4. Aqua Computer aquabus X4 3 halaman.
Halaman Cetakaqua
computer
Simultaneous use of aquabus X4 and Real Time Clock
Simultaneous use of aquabus X4 and Real Time Clock
Simultaneous use of aquabus X4 and Real Time Clock
Simultaneous use of aquabus X4 and Real Time Clock
If aquabus X4 and Real Time Clock modules are to be used simultaneously, the
aquabus X4 has to be installed onto the aquaero 5/6. Install the Real Time Clock
module somewhere else in the PC and connect one of the aquabus connectors of
the aquabus X4 to one of the aquabus connectors of the Real Time Clock module.
(Compatible aquabus cables: 53122 or 53162)
Guidelines and recommendations:
Guidelines and recommendations:
Guidelines and recommendations:
Guidelines and recommendations:
If used with multiple Calitemp sensors, each Calitemp sensor must be con-
●
nected to an individual connector of the aquabus X4 board – do not con-
nect two Calitemp sensors to the same connector using splitter cables!
All other aquabus devices (such as poweradjust, mps, farbwerk, etc.) can be
●
connected to any connector of the aquabus X4 board in any combination,
also to ports that are connected to (exactly one) Calitemp sensor. Use
aquabus splitters (product codes 53063, 53124 or 53231) to connect mul-
tiple devices.
© 2018
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
aquabus X4
94716