DEXMA DEXGate2 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Ukur DEXMA DEXGate2. DEXMA DEXGate2 8 halaman.

Remote access

At this point, if you have internet access, you may already have remote access to your DEXGa-

te2 from DEXCell Energy Manager.

The DEXGate2 uses UDP port 1196 to connect to our VPN (remote.dexcell.com)*.

1. Go to Diagnostics>Remote Support and check whether the DEXGate2 is connected

to our VPN

2. If not, click Connect

(* In case of doubt, ask your system administrator).

Connect and configure the meters

Modbus configuration: Connect the meters to DEXGate2 using the supplied adapter (DB15

Terminal block).

Each meter works in a particular way, so we strongly recommend reading the meter user

manual.

The meter configuration can be done from the web management interface in DEXGate2.

To connect Modbus meters via RS485, you must use terminals 3 (-) and 7 (+). Ground is 14

(GND)

DEXGate2 Pinout

RS485 (-)

RS485 (+)

Read the full manual for detailed information about installing the most common meters and

how to set the DEXGate2 to recognize them.

For modbus devices, indicate the BUS speed and the meters' Modbus addresses from the

menu "Modbus configuration" at DEXGate2.

You must also specify the "Gateway token" (if you have not done so before).

GND

Adapter

DB15 Terminal block