Aqua Cooler ODYBCC-BLK Panduan Pengguna dan Perawatan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Perawatan untuk Dispenser Air Aqua Cooler ODYBCC-BLK. Aqua Cooler ODYBCC-BLK 9 halaman.

Halaman Cetak
UNPACKING THE WATER COOLER
1.
After unpacking the water cooler, wipe with a soft cloth.
2.
Place the machine on a hard, flat surface. Make certain the unit is level. The unit should not be close to
direct sunlight or other sources of heat.
3.
It is best to place the water cooler in an area with good air circulation. Make sure there is at least 10 cm
of space between the back of your cooler and the wall. Keep a minimum distance of 5 cm on each side of
your water cooler.
WARNING - The drain cap on the back of the unit may become loose during shipping. Fasten the drain
cap tightly before you start to operate the unit. If the drain cap is loose, the unit may leak and cause
floor damage.

INSTALLATION PROCEDURE

1.
Make sure the water dispenser is not plugged into an electrical outlet.
2.
Insert the water bottle vertically on the seat into the non-spill system of the water dispenser.
3.
Press the cold water tap down until water begins to flow.
4.
Insert the power plug into an electrical outlet.
5.
Turn the electric switches to ON position to start the appliance.
DO NOT MOVE BOTH SWITCHES AT THE SAME TIME.
6.
Cooling indicator lights should light up. The appliance is designed to provide cook or cold water whenever
you need it. It will automatically turn on and off when the water reaches the desired temperatures.
Your Partner in Cool.
4