Aqua Creek PRO SPA 60 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Sistem Pengangkatan Aqua Creek PRO SPA 60. Aqua Creek PRO SPA 60 17 halaman.

AQUA CREEK PRODUCTS

24V SPA/PRO SPA LIFT TROUBLESHOOTING GUIDE

Before troubleshooting make sure the battery is fully charged.

If the lift doesn't move when the handset button is pressed:

When you can't get the lift to move check the following things:

Make sure the battery is fully charged:

A. Before charging the battery first make sure the green light on the front of the charger is

illuminated (this means that the charger is on). Then check to make sure the silver contact points

on the battery and charger are not damaged or corroded, and that they are clean. Then place the

battery on the charger and look for the orange charge light to illuminate on the front of the

charger. When the orange light goes off the battery is fully charged.

The top green light will always be

illuminated indicating that it has

power. When charging the battery the

bottom orange light will illuminate,

until fully charged.

B. When the battery is correctly installed on the charger or control box you should hear a "click"

indicating the battery is properly seated on the unit. Also note that when the battery is properly

seated there should not be any gaps between the battery and the control box/charger.

Not attached properly. Note the

white bracket is in front of silver clip,

which will not allow for an electrical

connection.

Properly Attached.

Note that the white bracket is behind the

silver clip. Not allowing movement.