Aqua Creek Products F-802SC2 Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Pengangkatan Aqua Creek Products F-802SC2. Aqua Creek Products F-802SC2 4 halaman. Lift graph
Juga untuk Aqua Creek Products F-802SC2: Manual (16 halaman), Manual (2 halaman)
Halaman CetakNOTE: BEFORE USING THE TRANSPORT CART FOR THE FIRST TIME, READ THIS SECTION
COMPLETELY AND FAMILIARIZE YOURSELF WITH THE FEATURES OF THE TRANSPORT CART.
STEP 01: RAISE THE LIFT TO ITS HIGHEST POSITION AND ROTATE
THE LIFT SO THE CART CAN ROLL UP BEHIND THE LIFT. LOWER
THE TRANSPORT CART FORKS AS LOW AS THEY WILL GO. (FIG. 01)
TRANSPORT CART
-FORKS LOWERED
-CART PARALLEL TO LIFT
STEP 02: ROLL THE CART INTO POSITION UNTIL
THE LIFTING FORKS ARE AROUND THE LIFT
HOUSING. THERE SHOULD BE ABOUT A 1/2"
SPACE BETWEEN THE BACK OF THE LIFT
HOUSING AND THE CART. CONNECT THE STAP
HOOKS THROUGH THE EARS OF THE LIFT (SCOUT
EXCEL - FIG. 03)
SAFETY STRAP
FIG. 03
EARS
FIG. 03
LIFTING FORKS
FIG. 01
FIG. 02
LIFTING FORKS
LIFT HOUSING
PRODUCT INSTRUCTIONS
LIFT REMOVED
FROM ANCHOR
Aqua Creek Products
SCOUT 2
-SEAT RAISED
-LIFT PARALLEL TO CART
STEP 03: TURN THE WINCH
HANDLE CLOCKWISE TO RAISE
THE LIFT UP AND OUT OF THE
ANCHOR. IF THE LIFT WON'T
MOVE, SHAKE THE MAST OF THE
LIFT TO LOOSEN IT IN THE
ANCHOR AND TURN THE HANDLE
UNTIL THE LIFT COMES OUT OF
THE ANCHOR. RAISE THE LIFT
UNTIL THE STEM IS AN INCH OR
TWO ABOVE THE FLOOR. THE LIFT
IS READY FOR TRANSPORTATION.
(FIG. 04)
DOWN
FIG. 04
5/31/2022 12:36:02 PM PAGE - 3
UP