AVM EVOLUTION MP 5.2 Panduan Petunjuk Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD AVM EVOLUTION MP 5.2. AVM EVOLUTION MP 5.2 20 halaman.

3. Advanced settings

The personal setup offers you a range of settings to individualize the device according to your personal

needs. To enter the personal setup menu, please switch off your device on the rear of the unit at the

mains switch (34). Keep the PROG button (4) pressed while you switch on the unit again. As soon as

the display shows *** personal setup *** menu you can release the PROG button (4).

When the personal setup is active you can select the desired function using the option keys (2,3). Use

the Skip buttons (13,14) to apply changes to a selected function. EXIT exits the personal setup and

stores the settings.

Sets display brightness between 25% and 100%.

NOTE: The setting 100% can lead to "burn in" effects on the display if the unit is operated in this

setting for a very long time. So please switch the unit to stand by, if not in use.

When AUTOPLAY is ON, your Media Player will start playing automatically every time a new CD is

inserted. If AUTOPLAY is OFF, the player will read the TOC (Table Of Content) of the inserted disc and

then go to STOP mode.

Deactivate unused inputs ("SKIP"). The unit will then skip these inputs when the option keys are

pressed (2,3) or if you select the inputs via the remote control.

You can individually set the names (max. 8 characters) of the different sources shown in the display (8).

Proceed as follows:

Press < or > (2,3) to select the input. Press REPEAT (6) to select the position and I<< or >>I (13,14) to

define the character (holding the key pressed changes the character every half second).

This function cancels certain or all settings and makes the unit return to default settings.

To enter the reset menu, please switch off your device on the rear of the unit at the mains switch (34).

Keep both the REP button (6) and the STOP button (10) pressed while you switch on the unit again

(34). As soon as the display shows the reset menu you can release both buttons (6,10).

Select if you just want to clear the input names (NAMES) with the PAUSE button (10) or reset the unit

completely (ALL) by pressing the PLAY button (12).

Pressing the STOP button (10) will bring the unit back to normal operating mode without resetting any

item (CANCEL).