AVM OVATION CD 6.3 Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pemutar CD AVM OVATION CD 6.3. AVM OVATION CD 6.3 19 halaman.

16 Analogue output left (XLR)

17 Analogue output right (XLR)

18 Analogue output right (Cinch/RCA)

19 Analogue output left (Cinch/RCA)

20 Digital output optical

21 Digital output coaxial

22 USB B digital input

23 Digital input optical 2

24 Digital input optical 1

25 Digital input coaxial 2

1.3 Installation and cooling

The unit can become hot depending on demanded output power or environmental

temperature. Therefore, it is important, that the cooling air can flow unhindered into the air

inlet in the bottom and flow out through the holes in the rear panel. Direct exposure to

sunlight is not recommended because this will heat up the unit and may cause unwanted

malfuctions.

Connect the unit to the mains outlet (28) by using the power cord which is (in some countries)

delivered together with the unit. Make sure that mains voltage is according to the value

printed on the rear panel of the amp (near mains connector).

CAUTION: Keep the unit switched off (29) until all audio connections are made.

Connect the analogue outputs (16-19) to the high-level inputs of a preamplifier or integrated

amplifier. The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from

each other and can be used independently.

26 Digital input coaxial 1

27 Digital input AES/EBU

28 Mains connector

29 Mains switch

30 Trigger outputs

31 Connector for external IR receiver

32 Phase LED

33 Link

34 Configuration port (updates)