AvMap GeoSat2 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Navigasi Mobil AvMap GeoSat2. AvMap GeoSat2 17 halaman. Gps car navigator

MOUNTING THE GPS ANTENNA

The next step is the GPS antenna installation. The end of the antenna is magnetic

so that you can place it outside the vehicle, its cable is made of a torn proof

material so that it does not break even if it is closed between the door and body of

the vehicle. The antenna can be placed on the dashboard or on the back of the

vehicle, but Geosat

After fastening the antenna take its cable inside the vehicle passing it through the

passenger door, and put it in the glove box, where you will leave the hank; pull out

the part of the cable you need to connect it to Geosat

The higher is the GPS antenna, the better it will receive the signal.

WARNING!!!

DO NOT COVER THE ANTENNA WITH SHIELDING MATERIALS (METALS,

ETC.).

DO NOT PUT THE ANTENNA IN THE BOOT NOR IN THE GLOVE BOX.

THERE MUST NOT BE ANYTHING BETWEEN THE ANTENNA AND THE SKY.

IF YOU PUT IT INSIDE MAKE SURE THAT THE GLASSES OF YOUR

VEHICLE ARE NOT SHIELDED, IF THEY ARE, PUT IT IN THE UNSHIELD

AREA OR OUTSIDE.

MOUNTING GEOSAT

After fixing the bracket, placing the antenna and connecting it to the navigator put

the end part of the bracket into the runners you find in the back of the unit and

insert the 12 Vdc 12-24 Vdc adapter into the slot of the car lighter.

At this step the installation is completed, pressing [POWER] you can use Geosat

If the adapter works well the led is on.

According to the type of vehicle you can use Geosat

running.

Summary:

Pay much attention when choosing the part of the dashboard where you want to

fix the bracket. Doing this remember what written above.

Install the magnetic antenna.

Keeping the passenger door open, take the cable into the vehicle.

Put the hank into the glove box.

Close the glove box letting out the part of cable with the connecting pin.

Connect the cable of the GPS antenna to Geosat

Put Geosat

in the bracket.

Put the 12 Vdc 12-24 Vdc adapter in the car lighter slot.

will work better if it is put outside, on the bonnet or on the roof.

by its end pin.

also when the engine is not

User Manual