Femooi Icee Panduan Produk - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Produk untuk Produk Perawatan Pribadi Femooi Icee. Femooi Icee 7 halaman.

Halaman Cetak

Maintenance

Please take good care of your icee™ for optimum usage and safety.
Do not use the ice-cold cooling mode continuously and repeatedly, as this might affect the
·
effect of the function.
After using the ice-cold cooling mode, please wait for the cooling surface to return to normal
·
temperature before using it for the next time. If the temperature of the ice-cold cooling head
is too high, icee™ will automatically suspend the function until the temperature returns to
normal.
Please don't hit hard on the ice-cold cooling head to avoid damage.
·
The hanging strap is only used for normal hanging usage. Please do not rotate the strap vio-
·
lently and swing the body when the strap is connected to the body to avoid damage.normal.
After each use, thoroughly clean the device using neutral detergent and clean water. After
·
cleaning, rinse the device with warm water and wipe it dry using a soft cloth or towel.
Do not use any clay or silicon-based cleanser, or any other granular skincare products such
·
as exfoliating creams or scrubs in combination with icee™. These substances may damage
the soft bristles.
Do not use essential oil based skin care products with icee™, to protect the silicone surface.
·
Do not clean the device with alcohol, benzene or acetone-based cleaning products, as these
·
may irritate the skin.
Do not immerse the body of icee™ in water or other liquids for a long time.
·
Do not place icee™ in acidic or alkaline liquids.
·
Do not put the icee™ in a dishwasher, microwave oven or high-pressure cooker as this could
·
result in accidents or injuries.
Avoid direct sunlight and do not expose the device to extreme heat or boiling water.
·
Keep the device out of reach from children and do not allow them to use the device.
·
Do not use the device when charging.
·
Turn off all functions before enabling the self-lock mode.
·
Charge your icee™ when the battery is low to extend the battery life.
·
Please use the original USB Magnetic Charging Cable included in the icee™ package for
·
charging.
To avoid damage, do not connect the icee™ USB Magnetic Charging Cable to a low quality
·
power adapter.
To avoid damage, do not use force to connect the magnetic head (metal contact surface) of
·
the USB Magnetic Charging Cable from the left side to the charging port on the back of icee™.
Do not disassemble, modify or repair the product.
·
Only use the device following the specific instructions mentioned in this manual.
·

Frequently Asked Questions

The most commonly asked questions about icee™ are listed below. If you are unable to find the
answer to your question on this list, please call our customer service hotline for more information.
The light indicator of icee™ does not flash after connecting the magnetic charging cable?
The battery is completely exhausted and requires to be charged for a few minutes before it
·
shows the light indicator again.
The magnetic charging cable or power adapted are not connected.
·
icee™ doesn't respond when the buttons are pressed?
The self-lock mode is enabled, simultaneously press the "Cooling button"
·
button"
for 2 seconds to unlock the device.
The internal temperature of the device too high, and the device entered the temperature
·
protection mode. Before trying again, please place the device aside until the temperature
dropped back to room temperature.
The battery is empty, please charge the device.
·
The microprocessor encountered a brief operational error. Please connect the charging cable
·
to reset the device to its initial state.
After initiating the ice-cold cooling mode, the temperature of the cooling surface is not getting
cooler?
The battery level is low or exhausted, please charge the battery.
·
The microprocessor encountered a brief operational error. Please connect the charging cable
·
to reset the device to its initial state.
If the outside temperature is extremely hot or cold, it may affect the cooling function of the
·
product. It is recommended to use the device at a suitable temperature (between 5°C and
28°C).
The silicone bristles of icee™ have degraded to a sticky or bubbly texture?
Discontinue use immediately. Although the silicone of icee™ is highly durable, it may degrade
·
under certain abnormal conditions. Consult this manual's "Maintenance" section on how
to avoid this.
Disposal
This device should not be disposed of as household waste. Instead, it should be collected at an ap-
propriate recycling point for electrical and electronic equipment. By ensuring a correct disposal of
this device, you will help to contribute to the environment and human health. Further, by recycling
this product, you will help with conserving natural resources.
and the "Cleansing