AvMap PIN4i Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alarm Mobil AvMap PIN4i. AvMap PIN4i 8 halaman. Tis immobilizer
WARNING
Never leave the device key(s) inside the vehicle when you leave it.
Never leave the driver door open.
Do not disassemble or alter the Device. Doing so may result in an accident, fire or electrical shocks, or
cause any other damages.
Do not let water or foreign objects enter the internal parts of the device. Doing so may result in smoke, fire
or electrical shock, or cause any other damages. If smoke is detected or smell strange odours, stop using
the device immediately and contact the dealer. Accidents, fire or electrical shocks may occur if the device is
still used under these circumstances.
This device key contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop
using the product and keep it away from children. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate medical attention.
Always replace CR2032 battery with a battery with identical capacity and characteristics. Never use a
battery different than the CR2032 model. Using the wrong battery may cause a fire or severe damage.
Do not use the function or the device for any other purposes than as specified herein. The manufacturer/
reseller will not be held liable for any costs, damages, expenses and/or liabilities, resulting from or arising
out of or in connection with any modification, alteration, manipulation or other action with respect to the
function and/or device.
Do not open the device. Contains no repairable parts. Repairs should be made by an authorized electronic
technician. Please contact your dealer (any unauthorized repair could result in damage to the unit and this
damage may not be covered by the warranty).
Do not touch the contacts or pins of the connectors on the device.
Connection to the power source with reversed polarity will damage the device severely. This damage is not
covered by the warranty.
Connection to a different power source other than that specified may result in improper operation, damage
to the equipment, or pose fire hazard if the limitations are not followed.
Do not substitute the power cord with one that is not the approved type. Never use an adapter plug to
connect to a 2-wire outlet as this will defeat the continuity of the grounding wire. The equipment requires
the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock
hazard that can result in serious injury or death.
When connecting an external battery, such as a vehicle battery, to the product, be sure to use the provided
cable, to avoid a safety hazard to the user or damage to the product.
The devices are built to be waterproof up to the level indicated by the IP code. The IP code classifies and
evaluates the degree of protection provided by mechanical enclosures against the intrusion of solid particles
(dust) and the access of liquids. Damage caused by exposure to liquids above the specified levels will void
the warranty terms.
Do not recharge non-rechargeable batteries. Do not mix new and used batteries.