Avnera AV6200 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol Avnera AV6200. Avnera AV6200 11 halaman. Wireless audio module

Avnera Corporation

6. Pairing Algorithm

The system has both "auto-pairing" and manual pairing capabilities. Auto-pairing can be used at the factory for

testing purposes but all units are shipped from the factory with "auto-pairing" enabled. This means the user can

unpack the sound bar and sub woofer and they will link immediately without user interaction. It does present an

issue if there is another unit close by as erroneous operation can result if a sound bar connects to the wrong sub

woofer. Auto-pairing persists for up to 30 seconds after units are powered up.

There is also the capability to manually pair the sub woofer to the sound bar. This is accomplished by turning on

the sound bar and setting it to pair mode via the IR remote (push the mute button for > 5 seconds). The sub

woofer can be put into manual pairing mode by pushing the button on the back panel for > 5 seconds when it is

not in a link. If the sub woofer is already linked it is not possible to enter pairing mode.

The Tx command set with the sound bar module includes a method to return the system back to auto pairing

mode but this is not a user feature – only for factory use.

7. Installation

This module must be installed in a device and not allow the user to replace nor modify it. And the location is ad

follows Figure.

Samsung Module PRD

AVNERA CONFIDENTIAL

Samsung Module Manual

page 6 of 10