Avnet FMC-MULTI-CAM4 Memulai - Halaman 6
Jelajahi secara online atau unduh pdf Memulai untuk Unit Kontrol Avnet FMC-MULTI-CAM4. Avnet FMC-MULTI-CAM4 9 halaman.
Once linux has finished booting, you should see the linux prompt on the serial console:
...
Setting console loglevel to 0 ...
root@xilinx:~# cd /media/card
root@xilinx:/media/card# ./gstfilter2d_optflow.sh
9. Change the active directory to the sd card with the following command : cd /media/card
10. Execute the design with the following command : ./gstfilter2d_optflow.sh
You should observe the live captures from the four cameras on the 4K monitor.
the top-left quadrant is running the "Optical Flow" accelerator, indicating movement in the scene
the bottom-right quadrant is running the "Filter 2D" accelerator, enhancing the edges in the scene
the other two quadrants are running a passthrough
Optical Flow
For more details on this design, including instructions on how to modify the gstreamer pipelines
and how to re-build the design, please refer to the "FMC-MULTI-CAM4 reVISION 2018.2 Tutorial",
available on-line.
Page 6
Filter 2D