Aqua EZ SV523 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Penyedot Debu Aqua EZ SV523. Aqua EZ SV523 4 halaman. Small pool vacuum system

Connecting To Filtration System (Part 2)

Vacuuming

Cleaning Vacuum

Thank You

Thank you for choosing Aqua EZ for all your pool maintenance needs.

Once the intake port or vacuum plate has been

installed you need to connect your hose to it. Fully

submerge hose and vacuum making sure that all

air has been removed, any air bubbles will hinder

vacuums ability to remove debris. While keeping

the hose fully submerged, connect it to the intake

connector or return fitting on your pool.

When vacuuming your pool start in the center and work your way

out. Guide the vacuum at a 45 Degree angle. Downward pressure

is not needed, let the vacuum work for you. If you are experiencing

reduced suction, check your hose, vacuum and filtration system for

air bubbles. A full collection bag will also cause decreased suction.

Empty when necessary. Remove cartridge filter element if more

suction is needed.

Cleaning your collection bag should be done once

vacuuming is completed or if the bag gets full of

debris. Remove vacuum from water. Open top latch

to expose vacuum chamber. Slide bag out of vacuum

body and dump out debris. Then reinstall bag and

close vacuum body.

For Helpful Hints and Notes see back page.

Page: 3