AVO MEGGER FlexiClamp 200 Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur AVO MEGGER FlexiClamp 200. AVO MEGGER FlexiClamp 200 4 halaman.
Halaman Cetak
Measuring Ranges:
Single wire mode
2-or-3-wire mode
Resolution:
Accuracy:
Single wire
2-or-3-wire mode
Flat or Twin cable
Round Cable
Calibration at 12 month inter vals is recommended
Temperature Range:
Humidity Range:
Power Supply:
Battery life:
L ow Battery Indicator:
below 7 V. Remove the battery if the instrument is likely to remain
unused for an extended period of time.
Battery Replacement:
insertion of a screw-driver (as shown below).Lever up and remove the
battery cover. Replace the exhausted battery, and slide the cover on
securely.
Safety: The instruments meet the requirements for double insulation to
IEC 1010-2-032, EN61010-2-032 to Category I I I*, 1000 Volts on
insulated cable . (*Relates to transient overvoltage likely to be found in
fixed installation wiring).
E.M.C:
The instrument meets EN 50081-1 and EN 50082-1 (1992)
Case Dimensions:
Max.Jaw Opening:
Weight:
Cleaning:
Wipe disconnected instrument with a clean cloth damped
with soapy water or Isopropyl Alcohol (IPA).
Supplied
User Guide
Carrying pouch with belt loop
Specification
0 to 199,9 Amp
0 to 40,0 Amp
0,1 Amp.
At 22˚C (72˚F) and rated frequency
2% of reading ± 2 digits
5% of reading ± 2 digits.
12% of reading ± 2 digits.
-0˚ - 40˚C (32˚F - 104˚ F)
0% to 95% RH
1 x PP3 - 9V battery (IEC 6LR61 type)
Typically 50 hours continuous use or 20
weeks of normal daily use.
when battery voltage falls
The battery cover can be released by the
To replace SLIDE into position
110mm x 229mm x 45mm (4
25,4mm (1")
315g (11oz) including batteries
Accessories
1
⁄
"x 9"x 1
3
⁄
")
3
4
Part Number
6172-215
8101-101