AQUA FORTE UltraSieve Low Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem Penyaringan Air AQUA FORTE UltraSieve Low. AQUA FORTE UltraSieve Low 12 halaman.
when installing the UltraSieve or when you change pumps. Procedure
and fasten the bolts again. You're done.
Maintenance
It is recommended to monitor the UltraSieve every day. Maintenance is very easy because of the waste outlet. In fact maintenance is about two operations: 1) To
1) Removing the waste that is on the surface of the sieve is very easy by opening the waste outlet and to rinse the waste away with a normal hose pipe. Another
position already because of the pump speed you can pull up the dam for a short while and push it back downwards again.
way of cleaning you have to place the sieve in an upright position or take the sieve out of the unit. After a certain period of time the sieve can get "fat" and this will
the sieve very thorough with alcohol before using it.
LOW
95
95
DIMENSIONS
LOW
HOUSING
64 x 37 x 75 cm
110 mm
INLET
OUTLET (1x)
90mm
90/110mm
WASTE OUTLET
450 x 345 mm
SIEVE
CAPACITY
± 25m³/h
WEIGHT
± 23 kg
POSITION 1
Position 1 This level gives the weir its maximum
length, suitable for pump speeds to ± 10m³/h. The
maximum length of the weir prevents the water
level underneath the sieve from going too high for
low speed pumps.
167,5
167,5
95
LOW "L"
525
545
MATERIAL
LOW "L"
64 x 54 x 75 cm
1 cm thick Polypropylene
Polypropylene
Polypropylene
PVC Slide Valve
450 x 500 mm
Stainless Steel 304
± 35m³/h
± 30 kg
95
EXTRA INFO
LOW
LOW "L"
2 x 110 mm
3 x 110 mm
Supplied with 90/63mm ex. tting
Supplied with PVC ring 110mm
300 micron
POSITION 2
Position 2 (Standard) This level gives the weir its
minimum length, suitable for pump speeds to ± 25m³/h.
The minimum length of the weir is to have a high water
level under the screen to prevent a high speed pump
from priming air.
640
AquaForte is a trademark of Sibo BV Veghel
www.aqua-forte.nl copyright Sibo BV version 1.01 2015
65
370 / 545
PROFESSIONAL
POND
PRODUCTS