Avocent DSR Series DSR4030 Catatan Rilis Firmware - Halaman 3

Jelajahi secara online atau unduh pdf Catatan Rilis Firmware untuk Beralih Avocent DSR Series DSR4030. Avocent DSR Series DSR4030 3 halaman. Kvm over ip switches
Juga untuk Avocent DSR Series DSR4030: Spesifikasi Perangkat Keras (2 halaman), Catatan Rilis (3 halaman), Catatan Rilis Firmware (3 halaman), Catatan Rilis Firmware (3 halaman), Catatan Rilis (3 halaman), Spesifikasi (2 halaman), Panduan Instalasi Cepat (8 halaman), Brosur (2 halaman), Brosur (3 halaman)

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030

DSR2035, DSR8035

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSRxx30.fl

DSR8035.fl