Avocent SwitchView DVI SH Series Panduan Instalasi Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Beralih Avocent SwitchView DVI SH Series. Avocent SwitchView DVI SH Series 4 halaman.
QUICK INSTALLATION GUIDE
To configure the serial port:
Set the terminal program as follows to configure
your serial port for a firmware upgrade:
Speed (baud) - 115200
Data bits - 8
Stop bits - 1
Parity - none
Flow control - none
To upgrade your firmware:
a. Go to www.avocent.com/updates and
download the appropriate firmware file.
b. Select the Transfer pull-down menu
located on the toolbar on the top of your
screen.
c. Ensure that Protocol Xmodem is
selected.
To Contact Avocent Technical Support: Visit www.avocent.com
Avocent, the Avocent logo and SwitchView are registered trademarks of Avocent Corporation or its affiliates in the U.S. and other countries. All other marks are the property of their respective owners. ©2009 Avocent Corporation.
SwitchView DVI DH and DVI SH
d. Select Send File.
e. Browse your computer for the
downloaded firmware file.
f. Open the firmware upgrade file and
select Send.
g. After the upgrade is complete, press the
spacebar to reset your KVM switch.
h. Verify the upgrade version showing on
your screen.
6
Operating the SwitchView DVI switch
You can control the SwitchView DVI switch for
PC and USB hub port control, as well as audio/
mic channel selection, scan and scan interval
time by using front panel push-buttons or a
hotkey sequence.
Switch Series
Complete instructions for both hotkey
commands and front panel button usage can be
found on the following page.
Hotkey sequence
Hotkey commands allow you to access and
control certain features of your SwitchView
switch via the local keyboard. The default
preceding hotkey sequence is Ctrl + Ctrl.
Front panel buttons
The front panel push-buttons provide direct
control over KVM channel switching by pressing
the PC button for PC port switching. If binding
is enabled between PC/USB hub port control
and audio/mic switching, they will jointly be
selected simultaneously.
590-918-501B