Avocent SwitchView MM1 Panduan Instalasi Cepat
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Beralih Avocent SwitchView MM1. Avocent SwitchView MM1 2 halaman. 2 or 4-port usb ps/2 kvm switch with usb hub 1.1
Juga untuk Avocent SwitchView MM1: Brosur & Spesifikasi (8 halaman)
Halaman Cetak
The following instructions will help you
install and use your SwitchView MM1
KVM switch.
Should you require further assistance, please
contact Avocent Technical Support.
Before Installing
The default setting of the SwitchView MM1
USB KVM switch is appropriate for most
systems. However, to utilize a USB keyboard/
mouse, you may need to disable the PS/2
option in the BIOS and enable the USB option
instead. In order for your PC to fi nd your USB
keyboard and mouse, you will need to sync
your hub port control and PC port selection
(for example, the green PC port LED and red
USB hub port LED should be aligned). Also,
USB keyboard users will NOT be able to utilize
the SwitchView MM1 switch hotkey function.
NOTE: Power down all computers and periph-
erals to be connected to the SwitchView MM1
switch before beginning installation.
1
Connecting your peripherals
Connect the shared PS/2 (or USB)
keyboard, monitor, mouse, speaker set and
microphone as well as other USB devices
to the SwitchView MM1 switch. It is also
recommended that you connect the external
power adaptor to your switch if you intend
to use USB hub ports. If connecting PS/2
computers you will use the 3-in-1 keyboard,
monitor and mouse cable. If connecting USB
computers, use the USB cable and seperate
VGA cable.
To Contact Avocent Technical Support
Avocent, the Avocent logo, The Power of Being There and LongView are registered trademarks of Avocent Corporation or its affi liates. ©2005 Avocent Corporation. All rights reserved.
Quick Installation Guide
SwitchView
2 or 4-Port USB PS/2 KVM Switch with USB Hub 1.1
To install the switch
USB HUB
2
Connecting your computers
Connect each of your computers to the
SwitchView MM1 switch.
3
Powering up your system
Power up the connected computers, ensuring that
the keyboard and mouse are enabled. The orange
LED indicates a connected port, the green LED
indicates an active port and the red LED indicates
the controlling port.
Call (888) 793-8763
VISIT www.avocent.com/support
The Power of Being There
®
MM1
1
Connect your
peripherals to the
SwitchView MM1.
PC1
PC2
PC3
PC4
CONSOLE
PC
HUB
USB connection
4
Operating the SwitchView MM1
There are two ways to control the SwitchView MM1
switch for PC and hub port control: front panel
push-buttons or a hotkey sequence.
Front panel buttons
The front panel buttons provide direct control
over switch operation and channel switching
by simply pressing the PC buttons for PC port
switching or one of the USB buttons for USB hub
port control switching.
®
3
Power up the
SwitchView MM1
switch and then
the connected
computers.
3-in-1 cable
connection
2
Connect your
computers using the
cables provided.
DOWNLOAD www.avocent.com
590-490-501A