Avocent ACS 6000 Catatan Rilis - Halaman 3

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Perangkat Keras Jaringan Avocent ACS 6000. Avocent ACS 6000 5 halaman. Advanced console server
Juga untuk Avocent ACS 6000: Catatan Rilis (4 halaman), Panduan Instalasi Cepat (20 halaman), Catatan Rilis (5 halaman)

Halaman Cetak

======================================================================

Patch Release v 2.4.0-11 bug fixes include:

The following files have new Linux® permissions (L3-65640351):

o /etc/shadow : read only root user

o /etc/passwd : read/write only root user

o /etc/groups: read/write only root user

OBWI and cli accept control-character in the configuration of options for ts_menu in

Appliance allows customer to use control character to send break to the serial port

during session against the serial port, when Break Sequence is configured with a valid

control character. Valid control character is string with 2 characters: the caret („^‟) is the

first one followed by a letter or one of the following special characters: square bracket

(„[„,„]‟), backslash („\‟), caret („^‟) , underscore („_‟). (L3-65628203).

IP alias and TCP port alias of serial port are not available in the appliance when the

status of the serial port is configured as disabled.

Patch Release v 2.4.0-9 bug fixes include:

Bonding activates primary interface (ETH0) during fallback operation. (L3-65627546)

IP alias of serial ports does not affect remote session to the appliance (ssh/telnet session

against appliance). (L3 65622292)

The Enterprise OID is the ACS 6000 family OID (Enterprises.10418.16) in the

SNMPTRAP message and in the ACS6000-TRAP-MIB.asn file. (L3 65614727)

Serial Viewer uses the SSH port configured in Security Profile. (L3 65623184)

Log of root user in the appliance‟s console port will perform authentication using

configured appliance authentication type. ACS 6000 allows administrator to enable

fallback to local only for root user in the appliance‟s console port. The configuration is

available in Appliance Authentication page (by default it is disabled). (L3 65627586)

OBWI works with IE-9 and Firefox 5 clients.

Production script reports correctly Ethernet test results.

Saveconf and restoreconf commands have option to transfer configuration file to/from

TFTP server. (L3 65630647)

Wiz command in CLI shows default gateway configured via OBWI/CLI when the

method is configured as static. (L3 65634438)

Restoreconf command restores serial ports configuration between appliances with

different number of serial ports. (L3 65634439)

Bug fixes include:

Telnet Send Break command sends the break signal to the target device. (L3 65582372).

In CLI, the option "-C" allows customer to execute CLI command in no-interactive mode.

(L3-65589589).

SNMP community name supports special characters. (L3-65602362).

The SNMP answer for sysObjectId is the Product Object ID.

The logging configuration depends on the configuration of Data Buffering, ie, the logging

configuration will be effective only if Data Buffering status is configured as „enabled‟. (L3-

65605084).

Bug Fixes