Avocent Advanced Console Server ACS 6000 Catatan Rilis - Halaman 2

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Perangkat Keras Jaringan Avocent Advanced Console Server ACS 6000. Avocent Advanced Console Server ACS 6000 15 halaman. Universal management gateway

Halaman Cetak

Software

Chrome

NOTE: 64-bit editions of Java are not supported. Occasional KVM session "network error" failures have been

seen using later updates of Java 7. Please use Java 6 Update 45 or Java 7 Update 5 to avoid these failures.

NOTE: If using Java 7 Update 51 or later and attempting serial and KVM session launches from the DSView™

software and the Avocent® Universal Management Gateway appliance, confirmation prompts may be

presented by the Java Run-time Engine even though there are no specific security concerns listed in the details

of the prompt. The launches can be continued by clicking Cancel or Continue to follow through on the launch

process.

NOTE: Please check the DSView™ software release notes for the latest client requirements for the DSView™

software.

===================================================================================

3. Features and Enhancements

===================================================================================

Firmware version 2.7.0.11 is an update of the Avocent® Universal Management Gateway 2000/4000/6000

appliance firmware.

This version includes the Trellis™ Intelligence Engine version 3.3.0.66 for use with the Trellis™ Real-Time

Infrastructure Optimization Platform, version 3.3. This appliance firmware version is also compatible with

Trellis™ Real-Time Infrastructure Optimization Platform versions 3.0.2, 3.1, and 3.2.

This version also includes patches for the "Shellshock" vulnerabilities. Avocent recommends upgrading to this

version or later to address the security risk.

Please refer to the installer/user guide for a detailed list of features supported by the Avocent® Universal

Management Gateway appliance.

===================================================================================

4. UMIQ Module Support

===================================================================================

NOTE: Attaching either the UMIQ-V1 or UMIQ-V2 module to a Windows target requires the USB CCID driver

to be installed. If the user is prompted by the Windows New Hardware Wizard, the Next button should be

selected.

NOTE: The Video Viewer included with the DSView™ 4 software does not support non-automatic

Keyboard/Video/Mouse (KVM) video sharing when the first video session is launched. When video sharing is

needed, please configure the appliance to automatically share video by navigating (within the DSView™

software) to Unit Overview-Target Settings-KVM Settings-KVM Devices and selecting Automatic Sharing.

NOTE: When using the DSView™ 4 software and moving a UMIQ module from one port to another port on the

Avocent® Universal Management Gateway appliance, the appliance must be resynced in the DSView™ 4

software to correctly update the port. Also, if the Automatically Delete Offline Modules configuration is selected,

delay at least ten seconds between disconnecting the UMIQ module from the appliance before reconnecting it

to a different port.

Version