Aqua Lung Airsource Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Instrumen Selam Aqua Lung Airsource. Aqua Lung Airsource 20 halaman.

2. While holding the molded hose steady just below the Trim Grip™ (Figure

3a), grasp and turn the Trim grip™ 1/4 turn counterclockwise (figure 3b).

Next, pull down on the molded hose to disengage the lower assembly

(figure 3c).

Figure 3a

3. remove the port plug from a medium pres-

sure (MP) port on the regulator using an ap-

propriately sized wrench (Figure 4).

4. check to ensure the hose o-ring is present

and in good condition, tighten the threaded

end of the hose into the port. Torque to 40

inch-pounds (4.5 nm) with a 9/16" wrench

(figure 5).

5. Secure buoyancy compensator to cylinder and attach first stage regulator

to cylinder valve.

6. check to ensure the connection o-ring on the lower assembly is present

and in good condition.

Figure 3b

Figure 3c

Figure 4

Figure 5