Aqua Lung EB001003 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Instrumen Selam Aqua Lung EB001003. Aqua Lung EB001003 20 halaman. Survival egress air

PREPARATION AND SETUP

SEA is packaged fully assembled and ready to use after it has been filled with air.

Before using, it is very important to carefully read and understand the procedures

outlined in this manual.

NOTE: The average duration of air supply listed in the Technical Specifications

section of this manual is based upon the maximum fill pressure as marked

on the cylinder. It is strongly recommended that the cylinder be filled to its

maximum fill pressure (cold fill), in order to provide maximum breathing volume.

WARNING:

1. Before attempting to fill SEA, ensure that the fill adapter and first stage are

completely dry – especially in the area surrounding the fill port.

2. SEA is configured with a 232 bar cylinder. Examine the cylinder markings to

determine the maximum fill pressure. Cylinders must have a current visual inspection

and hydrostatic test date (Fig. 2).

NOTE: Ensure hydrostatic retesting and visual inspection of cylinders is

carried out in accordance with local regulatory requirements (Fig. 2).

WARNING:

it is assembled with a non standard cylinder rated for a different fill pressure.

Doing so may result in rupture or explosion in the event of fire or overfilling.

Instead, immediately return SEA to a manufacturer trained service technician

and do not use under any circumstances.

Only use compressed gas that is in accordance with EN12021.

DO NOT attempt to fill SEA if the cylinder markings indicate that

Maximum Fill

Pressure

Year & Month

of Manufacture

Figure 2