Aqua Lung 769161 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Keselamatan Aqua Lung 769161. Aqua Lung 769161 16 halaman. Surface supplied harness

Halaman Cetak

threading the Cam Buckle

note:

Harness cylinder bands adjust for all standard cylinder

diameters: 6.9" (17.5 cm), 7.25" (18.5 cm), and 8.0" (20.3 cm).

The cylinder bands are properly threaded to the buckles when

the harness leaves the factory. If rethreading is necessary, follow

the procedure in this section.

note:

The cam buckle is labeled with numbers (1-4) and

directional arrows (

direction of tank band.

1.WhilefirmlyholdingthemetalD-ringwithyourlefthand,rotate

the buckle back towards the webbing. the buckle should form an

angle with the metal D-ring as shown in the top view (See Fig. 11).

2. insert band through the metal D-ring # 1

↑

middle slot #2

(See Fig. 12).

3. insert band through the inside slot #3

4. insert band through the outer slot #4

note:

This final threading step is done when the harness

is secured to the cylinder (refer to Securing Single Cylinder

Step: 2). Close the buckle half way to prevent the webbing

from slipping and thread the free end of the band through

the open slot in the end of the buckle.

↑↓

) that indicate threading order and

↓

, then through the

↑

(See Fig. 13).

↑

(See Fig. 14).

top View

Fig. 11

Fig. 12

Fig. 13

Fig. 14