Avocet 45tt Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Cyclometer Avocet 45tt. Avocet 45tt 13 halaman.

Halaman Cetak

Instrument displays either miles or kilometers. Functions can be reset

individually or globally

Speed Functions

SPEED: To 400.0 mph in 0.1 mph increments

Maximum speed: To 400.0 mph in 0.1 increments (resettable)

Average Speed: To 199.99 mph in 0.01 increments. Calculated only

while the wheel is turning. Averages up to 250 hours (resettable)

Pace Arrow. Indicates whether current speed is above or below

average speed. Displayed in all functions

Cadence: From 15 to 250 rpm. Requires cadence mount kit included

in packages marked 'Gear/Cadence'; available separately for others

Gear-Inch: From 20 to 200. Requires cadence mount kit

Distance Functions

TRIP DISTANCE: To 999.99 mi in 0.01 mi increments and from

1,000.0 to 1,999.9 in 0.1 increments (resettable). Display freezes at

1999.9 mi

Total Distance: To 19,999 mi in 1 mi increments. Display freezes at

19,999 mi

Riding Distance: To 999.99 mi in 0.01 mi increments and from 1,000.0

to 1,999.9 in 0.1 increments (distance used to compute average

speed)

Destination Distance. Distances up to 199.99 mi can be entered and

count down after the function is turned on

Time Functions

TIMER: To 9:59:59 in 1 second increments

Clock: To 1 minute; 12 or 24 hour format

Riding Time: To 9:59:59 (time used to compute average speed)

Destination Time: To 9:59:59. Only accumulates when Destination

Distance is turned on and the wheel is turning

Setup functions

Miles/Kilometers: Stored data converted when setup is changed.

Displays gear development in cm when setup for km

Total Distance Setup: Total distance programmable by the user

Wheel Size Calibration: Calibration for wheels from 30.24"

circumference to 130.99" circumference in 0.04" increments

Sleep: Cuts power consumption by 50% while retaining stored

data

Dimensions: 1.75" X 1.75" x 0.3"

Weight: Unit, 0.5 oz

Display: Dual liquid crystal, UPPER NUMBERS 0.3" high;

lower numbers 0.2 high

Operational Temperature Range: 0°F to 150°F

Data: Speed display updated every second. MultiPulse

transmitter sends 20 pulses per wheel revolution

Weather resistance: Water resistant

Mount System: Compatible with all Avocet computers except

models 15 and 25

Battery: 1.5 volt, 2 year life. Use Avocet Cyclometer 45 battery or

357 (Renata, Eveready, RayOVac, Phillips). SR44W (Maxell,

National, Panasonic, Sony, Toshiba), D357H (Duracell).

Accessories:

Cadence mount kit to add gear/cadence (if your package is

marked 'Gear/Cadence' , you already have this kit)

Rear mount kit for use with trainers that keep the front wheel

stationary

PART IV–INSTALLATION–GEAR/CADENCE

. TRANSMITTER.

Remove the rear

wheel. Place the transmitter on the hub flange

with its magnet facing out. Thread a cable tie

through every third slot on the transmitter if

your wheel has 32 spokes (4 ties) and every

fourth slot if it has 36 spokes (3 ties). Attach

the ties to spoke crossings. Center the ring while

gradually tightening the ties. Trim the tie ends

and reinstall the wheel.

Tie

Magnet

Spoke

crossing

2. RECEIVER.

Insert two cable ties in

the slots on the receiver holder. Place the

holder on the inside of the seat stay or chain

stay and align the receiver with the transmit-

ter. Tighten the ties and trim their ends. Slide

the receiver in its holder until it nearly touches

the transmitter.

Seat stay

Receiver holder

Receiver

Transmitter