Avocet CYCLOMETER 15 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Cyclometer Avocet CYCLOMETER 15. Avocet CYCLOMETER 15 4 halaman.

Halaman Cetak

MILES OR KILOMETERS.

Hold down the left button for 12 seconds until the test pattern appears

and all stored data is cleared. Four seconds after releasing 'mi' or 'km'

flashes. Press the right button to switch between miles and kilometers,

then complete calibration. With the Cyclometer 25 you can change be-

tween miles and kilometers without erasing stored data. Hold the left but-

ton in Total Distance (D) for six seconds and release when 'mi' or 'km'

flashes. Switch between units with the right button. Stored maximum and

average speeds and distance data are automatically converted to the units

chosen when you use this method. Exit by pressing the left button.

CALIBRATION.

from the table, or measure tire circumference by the precise calibration

method. Reach calibration from the Trip Distance function (d). Cyclometer

15: hold the left button until the calibration number 2155 shows in the

lower display and its right digit blinks (8 seconds). Cyclometer 25: hold the

Change the blinking digit

left button until the calibration number 2155 shows in the lower display (4

of the calibration number

seconds), release, then hold again 4 seconds until the right digit of the cali-

with the right button

bration number blinks. Change the number with the right button. Press the

left button to go to the next digit. After adjusting all the digits, press the left

button to exit. To check the calibration number, hold the left button in Trip

Distance. After 4 seconds the calibration will appear, and it will remain dis-

played for 4 seconds after you release the button.

CLOCK SET AND POWER SAVER

SETTING THE CLOCK.

ton in any function to display the clock. Hold down the left button then

press the right button to reach clock adjust. The right digit will blink.

Change it with the right button. Press the left button to go to the next

digit. When you adjust the left digit, it will not change in the display.

You will have to confirm that this digit is correct after you exit clock set.

If it is incorrect, return to clock set, go to the left digit, and adjust it again

with the right button. Note that you cannot set the clock when the Cy-

clometer 25 is asleep with only the clock displayed.

AUTOMATIC POWER SAVER.

and no wheel movement has been detected for 10 minutes, the display

will go blank (Cyclometer 15) or display only the clock (Cyclometer 25).

Power consumption is reduced by 50%. The normal display returns when

a button is pressed or the bicycle is moved.

Cyclometer 25 power

saver. Cyclometer 15

screen is blank.

ALL CLEAR.

You can clear Total Distance manually by holding down

the left button in the Total Distance (D) function until the test pattern

appears (10 seconds). This erases all stored data and resets the calibration

number to 2155 mm (Cyclometer 15). Calibration number is retained

with all clear in Cyclometer 25.

Go to the Total Distance (D) function.

Find the calibration number that matches your tire size

(Cyclometer 25). Hold down the right but-

After no buttons have been pressed

CALIBRATION

CALIBRATION NUMBERS.

ters. This table is based on popular tire brands and assumes recommended inflation pressure and

a rider weight of 165 lbs. (75 kg). To account for your unique combination of weight, tire pressure,

and tire model, measure your tire circumference.

Tire Size

Number

20 x 1.75

1528 mm

24 x 1

1753

600 tubular

1759

650 tubular

1929

26 x 1

1913

26 x 1.25

1952

26 x 1.5

1986

Calibration number equals wheel circumference in inches multiplied by 25.4, or in millimeters.

PRECISE CALIBRATION.

tire's 'rolling circumference' by the following method: Inflate your tires to your usual riding pres-

sure. Mark the ground under the valve stem when the stem is at its lowest point. Get on the bicycle

and have a helper push you in your normal riding position until the valve stem returns to its lowest

point. Take care that the tire travels in a straight line. Mark below the stem again, then measure the

distance in inches between the marks. Multiply your measurement by 25.4 to convert your measure-

ment to millimeters and get your calibration number. Record numbers for your different bicycles

and wheels below.

Bike/Wheel______________________________ Calibration #:____________________________

BATTERY & TROUBLESHOOTING

INSTALLING A NEW BATTERY.

move the battery, pry up the cap on the back

of the Cyclometer with a screwdriver. Install

the new battery with its positive (+) side to-

ward the cap, then press in the cap with your

thumb. Use only an Avocet Cyclometer 15/

25 battery or equivalent (see specifications).

Removing the battery erases all stored data

and resets the calibration number to 2155.

After installing a battery, the Cyclometer dis-

plays the test pattern briefly, then goes into

miles/kilometers setup.

The calibration number is wheel circumference in millime-

Tire Size

Number

Tire Size

26 x 1.95/2.0

2045 mm

700 x 28

26 x 2.1

2056

700 x 32

26 x 1

2068

700 x 38

700C tubular

2083

27 x 7/8

700 x 20

2081

27 x 1

700 x 23

2087

27 x 1 1/8

700 x 25

2091

27 x 1 1/4

For the most precise calibration of your Cyclometer, measure the

TROUBLESHOOTING

To re-

Speed and distance seem too high or too low

Check calibration number

Confirm calibration number by tire roll-out

Check that receiver is parallel to nearest spoke

Check spacing between receiver and transmitter

No speed or distance

Check transmitter/receiver alignment and spacing

Check contacts on back of Cyclometer and on mount

and clean with a pencil eraser if necessary

Check for broken wire

No Average Speed, Trip Distance, or Ride Time

Hold right button then press left button in Total

Distance (D) to reset Auto Start-Stop

No display or display dim

Replace battery

Incorrect data or unusual display

Total reset–hold left button in Total Distance (D)

function until test pattern appears

Incorrect display after a new battery is installed

Remove battery, then reinstall after 15 seconds

Number

2096 mm

2116

2159

2077

2105

2123

2142