DFE DION F64 Panduan Petunjuk Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Peralatan Pertanian DFE DION F64. DFE DION F64 12 halaman. Adapter kit

Instructions d'installation/ Installation instructions : F6413T937

Ensemble Adaptateur F64 / Adapter Kit F64 : DION

Step 11: Conversion for harvester model 1224-800 or F41-800



To operate the header with a Dion harvester model 1224 or F41 equipped with a 1000-

800 main transmission (cutterhead speed of 800 rpm), the main sprocket (28) on the

adaptor kit must be replaced.



Replace the sprocket (28) with the part F64-26611P (22 teeth) for 1224 model or F64-

26612P (17 teeth) for F41 harvesters, provided with the kit. Keep the replaced sprocket

for eventual future conversion.

Step 12: Installation on the harvester



Lift the rotary corn head as shown in the operator's manual.



Position the head on the harvester and install the lock pins.



Install the drive chain and adjust the tigthener.



Adjust the flotation on the harvester to reduce the weight at the tip of the header side

dividers to less than 45kg (100 lbs).

Step 13: Operation



Refer to the operator's manual for the start-up procedure.



Follow a strict maintenance program to extend the life of the header.

22 janvier 2013