AVOCOR AVC-SB1 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pembicara AVOCOR AVC-SB1. AVOCOR AVC-SB1 18 halaman. With hdmi and bluetooth aptx

POWER SOURCES

This audio system is designed to operate on 230 volts 50Hz, AC current. The main plug is

used as the disconnect device and should remain readily accessible. To prevent electric

shock, do not use the soundbar's mains cable with an extension cord, receptacle, or other

outlet unless the blades and ground terminal can be fully inserted to prevent blade

exposure. Never connect the audio system to 60 Hz DC, or anything other than the

specified voltage.

ELECTRICAL INFORMATION

This system is fitted with a BS1363/A 13 amp plug. If it is not suitable for your supply sockets it

must be removed and replaced with an appropriate plug. If the plug becomes damaged

and/or needs to be replaced, please follow the wiring instructions below. The plug

removed must be disposed of immediately. It must not be plugged into a supply socket as

this will be an electrical hazard. If the fuse needs to be replaced it must be of the same

rating and ASTA approved to BS1362. If the plug is changed, a fuse of the appropriate

rating must be fitted in the plug, adapter or at the distribution board. If the fuse in a

moulded plug is replaced, the fuse cover must be refitted before the appliance can be

used.

DISPOSAL

In the EU, electronic devices cannot be disposed of with regular household waste. Please

use the return or collections systems of the retailer from whom you purchased the

soundbar. Please dispose of batteries in an environmentally friendly manner. Do not

dispose of batteries with regular household waste. Please use the return or collections

systems of the retailer from whom you purchased the soundbar.

WIRING INSTRUSTIONS

Follow the appropriate wiring instructions given below. In both cases ensure that the

outer sheath of the cable is firmly held by the cable clamp.

44[Type here]

[Type here]