Aqua Medic Mistral Traveller Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Pompa Air Aqua Medic Mistral Traveller. Aqua Medic Mistral Traveller 12 halaman. Membrane air pump

4. Installation

The pump should be positioned in a dry place. Furthermore, it should be taken care to ensure that

water cannot enter the pump when, for instance, it is switched off for aquarium maintenance or

during a power failure. There are two methods of installation:

above the water level

below the water level. In this case, a reliable non-return valve must be fitted in the air pipe.

Ensure that the power plug can easily be reached at any time.

Examples for setting up above (A) or below the aquarium (B).

1. Mistral traveller

Safety advices

The pump is constructed for indoor use only. Before working at the pump, the power plug has to

be taken from the mains. The connection cable and the power plug may not be changed. If the

power cable is damaged, the pump may not be used any more.

5. Maintenance/Cleaning

Air filter: The air inlet and filter are positioned at the bottom of the pump. The sponge in the air

filter has to be changed regularly depending on the quality of air. To change the filter, pull the

power plug, unscrew the base plate and push the air filter out. Instead of a sponge, cotton wool

can be used.

6. Failures

The pump is constructed for long-term low maintenance operation. In case of power decrease, first

of all check the air filter (see item 5).

2. Aquarium

3. Air stone

4. Non-return valve