Avolites Titan Net Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Avolites Titan Net. Avolites Titan Net 15 halaman.

4. CONNECTING UP

The TNS can be used with conventional copper network cabling or with fibre optic

cabling using opticalCON ports (as fitted on the Avolites D9 or Arena consoles). A

typical use is to provide network distribution at the stage.

Neutrik opticalCON 850nm multimode fibre must be used with the opticalCON ports on

D9, Arena and TNS.

The TNS will switch on automatically when mains power is connected.

When power is disconnected, the TNS will continue to run on its internal battery (UPS).

If the network signal also stops then the TNS will turn off after 300 seconds (5 minutes),

or you can manually shut it down using the Shutdown menu option.

If the network signal remains active the TNS will assume a power failure and will keep

running on its UPS until the battery gets too low.

Multimode bre

to stage

FOH lighting console

ArtNet or sACN to lights

TNS at stage

Titan Network Switch v1a.doc 29 March 2022

Connecting up - Page 7