BilJax EZ-RAX Manual Petunjuk Perakitan - Halaman 5
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Alat BilJax EZ-RAX. BilJax EZ-RAX 6 halaman.
Halaman CetakSTEP 4
1)
Load the EZ-RAX with the load capacity parts from page 2. Place casters (with snap pins removed)
on the rack, and secure in place with the snap pins. See Fig. 4 and 5 side views for reference.
STEP 5
1)
Use 12' strap - attach to
ring A and wrap around
the frames and end guard
panels, and attach to ring B.
Tighten strap. See Fig. 6.
2)
Use 8' strap - attach to ring C
and wrap around walkboards,
cross braces, side guard rails,
and toeboards and attach to
ring D. Tighten strap. See Fig. 6.
3)
Use 6' strap - attach to
ring D and wrap around
the outriggers, and attach
back to ring D. Tighten strap.
See Fig. 6.
4)
Check to make sure everything
is secure.
WARNING
To prevent damage to building overhangs
or canopies, always be aware of the overall
clearance height of the EZ-RAX once it is
loaded on the transport vehicle.
Side View #1
(Fig. 4)
A
Side View #2
(Fig. 5)
Accessory Rack Side
(Fig. 6)
C
D
B
5